Sales Popup
Surat, Gujarat
6 hours ago
USD
  • USD
  • EUR
  • GBP
  • CAD
  • JPY
0

Midship Garage - Toyota MR2 AW11 - 'GT' Front Bumper Half Cover Lip

Product type: Exterior

Status:

$ 475.00

DESCRIPTION

The Midship Garage® 'GT' Front half cover for the Toyota MR2 AW11 is designed with a sweeping front lip and beveled fog light delete. An homage to the N2 period look fitting both MK1a & MK1b models! Handcrafted in the USA.

FEATURES
  • Handcrafted from woven fiberglass
  • Fits both MK1a and MK1b models
  • 12/2022: Includes inner mounting brackets for factory placement of lower lip. 
  • USA Made
SPECIFICATIONS
Brand Midship Garage
Product Number MG-W11-GT01
Material Fiberglass, Black Gelcoat
Product Type Bumper, Aftermarket
Ground Clearance ~3" with stock suspension & 14" wheels
 COMPATIBILITY 
Year Vehicle Model Chassis Sub-model & Trim Engine
1983, 1984, 1985, 1986, 1987, 1988, 1989
Toyota MR2 AW11

2dr Coupe

Base, MK1A
(USA, Japan, Europe)
---
Supercharged, MK1B
(USA, Japan, Europe)

1.6L 4A-GE
---
1.6L 4A-GZE
DELIVERY
Type Ships From Est. Lead Time
Made-to-order
USA, West Ships in 3-4 weeks
REMARKS
  • Height adjustable coilovers are recommended for increased ground clearance on 15"+ wheel sizes.
  • 6mm hole will need to be drilled into each front fender, using the pre-drilled half cover as a guide.

Customer Reviews

Based on 3 reviews
67%
(2)
0%
(0)
33%
(1)
0%
(0)
0%
(0)
J
Jason A. (Brooklyn, US)
Amazing product

Honestly, when i first found out they were making these GT front bumpers..I got super excited. Because there isn’t many fabrication companies that make parts for these cars. In terms of cosmetics.

The build quality is truly amazing and fits perfect. However, I want to point out, the section of the GT bumper, right below the hazard lights, stick out about a little less than half an inch, which causes the 3M seal tape to have unnecessary pressure, going outward, once installed.

Nonetheless, the N2 design is such a neck breaker, and it also gives it that “BN sports kit” style as well which fits the car like a glove.

If you have an AW11 and want to step up your game, I truly recommend this bumper.

k
kevin k.
Not bad, but could use another revision

I understand how things went with the last year and this products development. I was happy to see it get updated, but the additional bolts and drilling into the fender I am not thrilled about.

R
Rene M. (Ontario, US)
Great Product! absolutely amazing.

After driving it for a week I can say I absolutely love the bumper looks great . Installation with the new center brackets makes it easier to install. I had to pry one side of the chassis that holds the bracket in order to install them witch was probably the most difficult part of the installation. Once they are in place the fitment in relation from bumper to the chassis of the car fits well. The bottom of the bumper bar would be best fit if adhered to the half cover first before drilling the 2 holes on the fender to mount.

Customer Reviews

Based on 3 reviews
67%
(2)
0%
(0)
33%
(1)
0%
(0)
0%
(0)
J
Jason A. (Brooklyn, US)
Amazing product

Honestly, when i first found out they were making these GT front bumpers..I got super excited. Because there isn’t many fabrication companies that make parts for these cars. In terms of cosmetics.

The build quality is truly amazing and fits perfect. However, I want to point out, the section of the GT bumper, right below the hazard lights, stick out about a little less than half an inch, which causes the 3M seal tape to have unnecessary pressure, going outward, once installed.

Nonetheless, the N2 design is such a neck breaker, and it also gives it that “BN sports kit” style as well which fits the car like a glove.

If you have an AW11 and want to step up your game, I truly recommend this bumper.

k
kevin k.
Not bad, but could use another revision

I understand how things went with the last year and this products development. I was happy to see it get updated, but the additional bolts and drilling into the fender I am not thrilled about.

R
Rene M. (Ontario, US)
Great Product! absolutely amazing.

After driving it for a week I can say I absolutely love the bumper looks great . Installation with the new center brackets makes it easier to install. I had to pry one side of the chassis that holds the bracket in order to install them witch was probably the most difficult part of the installation. Once they are in place the fitment in relation from bumper to the chassis of the car fits well. The bottom of the bumper bar would be best fit if adhered to the half cover first before drilling the 2 holes on the fender to mount.