Surat, Gujarat
6 hours ago
USD
  • USD
  • EUR
  • GBP
  • CAD
  • JPY
0

Midship Garage - Toyota Celica GT/GT-S [ZZT] - 'Tidal' Widebody Over Fender Kit

Product type: Exterior

Vendor: Midship Garage

Status:

$ 1,395.00

This widebody kit from Midship Garage is designed around the 00-05 Celica's existing body lines and OEM Bumper, leaving room for front and rear lips, as well as side skirts of your choice. An increase of + ~30mm front and + ~50mm rear for a much wider profile. Each kit is produced from the highest quality fiberglass.

Features

  • (2) +30mm Front over fender w/ Bumper garnish
  • (2) +50mm Rear over fender w/ Bumper garnish
  • Handcrafted from high quality fiberglass
  • Handcrafted in the USA!

Application

  • 00-2005 Toyota Celica GT/GT-S [ZZT] 
    • This kit is designed to be blended to the vehicle body.
    • Rivets can also be used to mount the kit with some modification.

Production

  • Lead time, 2 weeks.

Note

  • TRD and aftermarket bumpers may require modification to work with the bumper attachments.
  • Professional installation is highly recommended.

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
M
M.N.
V2 over fenders

The quality of the fibreglass kit was top notch with it being a consistent thickness throughout, however, there was chips on the overfenders and I was expecting the kit to be primed. The fitment instructions state for the fenders to be glued on using vehicle grade adhessive however there is not enough space on the taps on the overfenders to securely glue them to the body of the car. Fitment was very good however there was some panel gaps due to needing to modify the kit to fit with the diffuser, front lip and side skirts.

Thanks for your review. The undercut edges are designed to be trimmed away to fit the over fender to the body. The fenders themselves are designed to be blended into the body.

For example, the front fenders are meant to sit flush with the body. The decision to leave it looks fine, but may affect fitment.

Perhaps we can provide a diagram or trim for future reference.

Traditionally, fiberglass is not shipped primed, since most painters will still perform their own prep work and apply their own primer as a rule of thumb.

Thanks again for your feedback!

A
A.
V2 Flares

Great kit! Definitely a game changer. I highly recommend getting help from someone you trust if you can’t install them yourself. Flares are supposed to be “molded” but I decided to change it up a little so I’ll be on the lookout if someone do it that.
Measurements were a little off but nothing huge that you wouldn’t be able to fix. I personally had to do some mods to the flares but was able to fix it up.
So besides that. Very very happy with the outcome.
If you need an idea of what mine looks like check my IG: itzalexcgt
And thanks Midship for the absolute game changer and design.

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
M
M.N.
V2 over fenders

The quality of the fibreglass kit was top notch with it being a consistent thickness throughout, however, there was chips on the overfenders and I was expecting the kit to be primed. The fitment instructions state for the fenders to be glued on using vehicle grade adhessive however there is not enough space on the taps on the overfenders to securely glue them to the body of the car. Fitment was very good however there was some panel gaps due to needing to modify the kit to fit with the diffuser, front lip and side skirts.

Thanks for your review. The undercut edges are designed to be trimmed away to fit the over fender to the body. The fenders themselves are designed to be blended into the body.

For example, the front fenders are meant to sit flush with the body. The decision to leave it looks fine, but may affect fitment.

Perhaps we can provide a diagram or trim for future reference.

Traditionally, fiberglass is not shipped primed, since most painters will still perform their own prep work and apply their own primer as a rule of thumb.

Thanks again for your feedback!

A
A.
V2 Flares

Great kit! Definitely a game changer. I highly recommend getting help from someone you trust if you can’t install them yourself. Flares are supposed to be “molded” but I decided to change it up a little so I’ll be on the lookout if someone do it that.
Measurements were a little off but nothing huge that you wouldn’t be able to fix. I personally had to do some mods to the flares but was able to fix it up.
So besides that. Very very happy with the outcome.
If you need an idea of what mine looks like check my IG: itzalexcgt
And thanks Midship for the absolute game changer and design.