Sales Popup
Surat, Gujarat
6 hours ago
USD
  • USD
  • EUR
  • GBP
  • CAD
  • JPY
0

Homepage Featured Collection



Midship Garage - Toyota MR2 SW20, 3S-GTE Gen. 2, 3, 4 - Coil-on Plug & Billet Adapter Conversion Kit

Midship Garage introduces an Coil-on-Plug conversion kit, utilizing aftermarket coil on plugs, mo...

Midship Garage introduces an Coil-on-Plug conversion kit, utilizing aftermarket coil on plugs, mounted to a USA made Billet Aluminum bracket for your 3S-GTE Gen 2, 3, 4 engines. Outputting 8A at 1.8ms of dwell, this conversion will improve MPG and give you the ignition power required for your high horsepower build. Don't resort to reusing stock coil on plugs which will not keep up with the demand of a high horsepower build. FEATURES Direct-fit installation For 2nd, 3rd, or 4th Generation 3S...

$ 345.00 $ 345.00 (3 variants)

Midship Garage - Toyota MR2 SW20 3S-GTE Gen 3/4 - Rotated Turbo Kit w/ Stainless Manifold & Downpipe

A modern forced induction solution for the MR2 SW20 & 3S-GTE Gen 3/4 engine. The Midship Gara...

A modern forced induction solution for the MR2 SW20 & 3S-GTE Gen 3/4 engine. The Midship Garage rotated turbo kit features a USA made Comp Turbo, mated to TIG welded  Lightweight (Schedule 10) Stainless Steel Piping. A comprehensive package, well suited to run even on stock internals. Dyno proven! FEATURES Schedule 10 (Lightweight) Stainless Turbo Manifold w/ wastegate provision for 50mm gate Welding internally, allowing for as much unrestricted flow into the turbine housing possible S...

$ 4,899.00 $ 4,899.00 (4 variants)

Midship Garage - Toyota 3S-GTE Gen 3/4 - Rotated Turbo Manifold

A modern forced induction solution for the MR2 SW20 & 3S-GTE Gen 3/4 engines. The Midship Gar...

A modern forced induction solution for the MR2 SW20 & 3S-GTE Gen 3/4 engines. The Midship Garage® rotated turbo manifold, mated to TIG welded, Lightweight (Schedule 10) Stainless Steel Piping.  Features [1] Schedule 10 (Lightweight) Stainless Turbo Manifold w/ wastegate provision for 45mm/ 50mm gate. Back-purged and Turbo inlet flange machined for use with V-band only. Application Toyota 3S-GTE [Celica ST205, MR2 SW20] Gen 3 & 4 engines Notes This manifold has been tested with...

$ 1,475.00

Midship Garage - Toyota 3S-GTE, Gen 2/3/4 - Billet Aluminum 'OE+' Plenum DIY Intake Manifold

Midship Garage introduces a flow tested, 3-piece Billet Aluminum DIY intake manifold, making use ...

Midship Garage introduces a flow tested, 3-piece Billet Aluminum DIY intake manifold, making use of the Toyota 3S-GTE runners. Beautifully redesigned including a lower plenum, upper plenum kit, and throttle plate. The American made Billet Aluminum plenum is sealed with viton o-rings, matched with one-piece ORB An fittings and flow tested ports, this plenum will hold up to 60psi of boost pressure and outperform for it's price range. Features Midship Garage 3-piece Billet Aluminum Plenum Made...

$ 1,150.00 $ 1,425.00 (12 variants)