Sales Popup
Surat, Gujarat
6 hours ago
USD
  • USD
  • EUR
  • GBP
  • CAD
  • JPY
0

Fuel System



AEM - Toyota MR2 Spyder, MR-S - 320lph E85 Compatible High Flow In-Tank Fuel Pump

The AEM E85 Fuel Pump is designed for in-tank installation on high performance naturally aspirate...

The AEM E85 Fuel Pump is designed for in-tank installation on high performance naturally aspirated and forced induction vehicles. It flows 320 lph (84 gph) at 43 PSI (please refer to the chart for fuel pump horsepower versus pressure for various applications and fuel types). AEM's E85 Fuel Pump features robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and has been tested to work with ethanol fuels up to E100, methanol ...

$ 129.38 $ 136.00

Radium Engineering - Toyota, Lotus 1ZZ/2ZZ - Fuel Pressure Gauge & Hose Kit

This fuel hose and gauge kit is designed for use on the 2005-2011 Lotus Elise and Exige with the ...

This fuel hose and gauge kit is designed for use on the 2005-2011 Lotus Elise and Exige with the 2ZZ-GE engine, both supercharged and normally aspirated. However, it can serve the same function for most 1ZZ/ 2ZZ powered vehicles, with the OEM fuel system. This kit replaces the factory fuel hose and connects directly to the stock 2ZZ-GE fuel rail. This kit is helpful for tuning or troubleshooting the fuel system on the 2ZZ-GE engine. FEATURES 300psi rate Nitrile rubber hose Black anodized Al...

$ 123.45 $ 129.95

Radium Engineering - Toyota, Lotus (1ZZ, 2ZZ) - Fuel Pump Adapter -6AN Fitting for OEM Pump

Upgrade your fuel lines with this OEM pump adapter fitting from Radium Engineering. This allows y...

Upgrade your fuel lines with this OEM pump adapter fitting from Radium Engineering. This allows you to run a -6AN hose throughout your fuel system for increased demand in fuel delivery, as well as added protection against increased fuel pressure. FEATURES Easier Pump Install Anodized Aluminum Integrated O-Ring For use with factory Toyota fuel pump housing only SPECIFICATIONS Brand Radium Engineering Product Number RAD-20-0032 Type Fuel System, Aftermarket COMPATIBILITY  Year ...

$ 36.60 $ 40.00

Radium Engineering - Universal Fuel Pressure Regulator (3 or 4 Bar)

Introduction This universal Radium Fuel Pressure Regulator (FPR) is built around the common OEM B...

Introduction This universal Radium Fuel Pressure Regulator (FPR) is built around the common OEM Bosch regulator tops found in many Audi/VW (and other) applications. The compact billet aluminum housing provides a convenient package for plumbing and mounting. The regulator body is held in the housing with a stainless steel snap ring and can easily be removed for cleaning or replacement using snap-ring pliers.  The Bosch regulator tops are vacuum referenced with a 1:1 ratio. The two main high pr...

$ 104.45 $ 160.50 (3 variants)

Deatschwerks - Toyota 1ZZ-FE/2ZZ-GE - 440cc Top Feed Injector Set (4)

Introduction Deatschwerks high flow fuel injectors are built using only quality OEM cores. In add...

Introduction Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Testing is performed in-house on their custom built New Age Technologies injector flow bench. Features Below is a brief outline of some of their testing: 6-point coil test Leak testing from 0-100psi RPM Ramp 500-10,000 rpm Pulse Width Ramp 0.5-17ms Spray pattern analysis...

$ 329.00 $ 339.00

AEM - Universal Adjustable Fuel Pressure Regulator, Black

AEM's Universal Adjustable Fuel Pressure Regulator is capable of supporting enough fuel flow for ...

AEM's Universal Adjustable Fuel Pressure Regulator is capable of supporting enough fuel flow for engines up to 1000 horsepower. Our patented interchangeable discharge ports enable the regulator's output to match the output of any fuel pump. Our universal fuel pressure regulator is tapped to accept a -6 AN, or 9/16"x18 fittings and includes a 1/8 NPT port for a fuel pressure gauge or pressure sensor pick up. FEATURES Adjustable from 20 psi to maximum fuel pump capacity Interchangeable disch...

$ 138.58 $ 148.00

AEM - 320lph E85 Compatible High Flow In-Tank Fuel Pump

The AEM E85 Fuel Pump is designed for in-tank installation on high performance naturally aspirate...

The AEM E85 Fuel Pump is designed for in-tank installation on high performance naturally aspirated and forced induction vehicles. It flows 320 lph (84 gph) at 43 PSI (please refer to the chart for fuel pump horsepower versus pressure for various applications and fuel types). AEM's E85 Fuel Pump features robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and has been tested to work with ethanol fuels up to E100, methanol ...

$ 129.38 $ 136.00

Radium Engineering - Universal Fitment - Fuel Surge Tank for External Pump, Single or Dual Pickup...

Introduction A fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehi...

Introduction A fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. The FST fuel pump(s) feed the fuel rail(s). The volume of fuel inside the surge tank acts as a buffer to always keep the FST pump supplied with fuel. This volume is maintained by the main fuel tank's pump as well as the fuel returning from the fuel pressure regulator. Excess fuel in the surge tank is returned back to the vehicle's main fuel tank. The surge ...

$ 375.25 $ 399.00 (2 variants)