Midship Garage - 00-06 Toyota MR2 Spyder - A01 Rear Bumper Assembly
The A01 ASPIRA name is derived from the meaning 'to Aspire'. This rear bumper design for the Toyo...
The A01 ASPIRA name is derived from the meaning 'to Aspire'. This rear bumper design for the Toyota MR2 Spyder (ZZW30) model is available for Midship Garage®, designed and made in USA. The optional bumper garnish includes two snap-in covers, showing the rear bumper without optional garnish altogether. Customization by the user is the main focus. The bumper use factory mounting tabs, including reinforcement underneath the tail lights. FEATURES Fiberglass woven construction Black Gelcoat Finis...
Midship Garage - 00-05 Toyota MR2 Spyder, MR-S - 52mm (2-1/16") Dual Gauge Pod
Allow for additional engine measurements with the Midship Garage® 52mm (2-1/16") dual gauge pod ...
Allow for additional engine measurements with the Midship Garage® 52mm (2-1/16") dual gauge pod for Toyota MR2 Spyder, MR-S Roadster 'ZZW30'. USA Made, available in Left-hand Drive (LHD) and Right-Hand Drive (RHD) variants, this pod installs between the factory gauge cluster and A-pillar. FEATURES 52mm (2-1/16") x 2 diameter opening Fits commonly sized gauge lengths up to 48mm (1.8") Adhesive included for bottom flanges Easy mounting install to dashboard Available in Left-hand drive or Righ...
Midship Garage - 00-06 Toyota MR2 Spyder, MR-S - Stainless Steel HVAC Climate Control Dial Set
Upgrade your 2000-2006 Toyota MR2 Spyder, MR-S interior with these re-imagined climate control HV...
Upgrade your 2000-2006 Toyota MR2 Spyder, MR-S interior with these re-imagined climate control HVAC dials from Midship Garage®, laser cut from 304 Stainless Steel, with a brushed finish. The diffusion backing allows the HVAC lights to diffuse and illuminate the dial. FEATURES Set of 3 (Left, Center, Right dial) Diffusion sheet backing w/ adhesive tape US 304 Stainless Steel w/ Satin Brush Polished Finish Works with Factory HVAC panel and Midship Garage Center Console USA Made SPECIFICATIO...
Midship Garage - 00-06 Toyota MR2 Spyder, MR-S - Center Console
This center console latest in refreshing interior styling by Midship Garage®, for the 2000-2006 T...
This center console latest in refreshing interior styling by Midship Garage®, for the 2000-2006 Toyota MR2 Spyder, MR-S. Allowing for use of a "floating" 10.1" touchscreen stereo, space for wireless charger pad, and added rear mounted cup holders. Available for Midship Garage®, by Quantis Concepts, designed and made in USA. FEATURES 5/2022: Updated slide mounting clips for privacy panels + stainless steel mounting screws 8/2022: Updated Full-length Replacement HVAC Cable for circulation lev...
Midship Garage - Toyota MR2 Spyder, MR-S - A01 Front Bumper Grille & Side Pod
The A01 front grille is a re-imagined design for the Toyota MR2 Spyder, MR-S (ZZW30) model. The f...
The A01 front grille is a re-imagined design for the Toyota MR2 Spyder, MR-S (ZZW30) model. The front grille features a patterned garnish with universal honeycomb mesh backing. With an optional side pod including a daytime running light and separate 2.5" outlet for a brake cooling duct attachment. FEATURES Handcrafted, fiberglass woven construction Front Grille USA Made Universal Mesh Backing Optional Side Pods Outer: 2.5" outlet for cooling duct tubing USA Made Universal LED DRL (Dayti...
Midship Garage - Toyota MR2 Spyder, MR-S - A01 Front Bumper
The A01 'ASPIRA', derived from the meaning 'to Aspire, or Strive for', is a re-imagined front bum...
The A01 'ASPIRA', derived from the meaning 'to Aspire, or Strive for', is a re-imagined front bumper design for the Toyota MR2 Spyder, MR-S (ZZW30) model is available for Midship Garage®, by Quantis Concepts, designed and made in USA. FEATURES Handcrafted bumper, woven fiberglass construction USA Made Lower reinforcement mounting Reinforced upper mounting tabs Universal mesh grille 3/2022: Mounting flange length increased Front Grille + LED Side Pod Now Available! Sold Separately (Here) ...
Midship Garage - Toyota Celica GT, GT-S - Rear Window Louver
The highly anticipated, low-profile rear window louvers exclusively by Midship Garage add a retro...
The highly anticipated, low-profile rear window louvers exclusively by Midship Garage add a retro-modern finish to the 7th generation Toyota Celica GT, GTS. FEATURES 6/2021: Updated brackets & hardware Fiberglass construction Select from Satin Black (unpainted) or Gloss Black (painted) option from drop-down menu. Lightweight & durable Removable for easy cleaning Mounting brackets and tamper-proof hardware USA Made This kit includes: Rear Window Louver x 1 Mounting Brackets w/ w...
Midship Garage - 00-06 Toyota MR2 Spyder, MR-S - Headlight Eyelid Cover
Styled similarly to the 'Taikyu' endurance teams of the 90s and 2000s, the Midship Garage headlig...
Styled similarly to the 'Taikyu' endurance teams of the 90s and 2000s, the Midship Garage headlight lens cover 'eyelid' adds a race-inspired styling option to the original headlights of your 2000-2006 Toyota MR2 Spyder, MR-S, or Roadster 'ZZW30' model. Optional carbon fiber material. FEATURES Handcrafted from woven fiberglass with black gelcoat finish. Optional carbon fiber, hand-layup Select from drop-down menu Heavy duty adhesive backing Adheres to your existing lens cover USA Made ...
Midship Garage - 84-89 Toyota MR2 AW11 - 'GT' Front Bumper Half Cover Lip (Rev. 2)
The Midship Garage® 'GT' Front half cover for the Toyota MR2 AW11 is designed with a sweeping fro...
The Midship Garage® 'GT' Front half cover for the Toyota MR2 AW11 is designed with a sweeping front lip and beveled fog light delete. An homage to the N2 period look fitting both MK1a & MK1b models! Designed and handcrafted in the USA. FEATURES Handcrafted from woven fiberglass Fits both MK1a and MK1b models 12/2022: Rev. 2 includes inner side brackets for additional support USA Made SPECIFICATIONS Brand Midship Garage Product Number MG-W11-GT01 Material Fiberglass, Black Gel...
Midship Garage - 00-05 Toyota Celica GT, GT-S - Widebody Over Fender Kit
The Tidal widebody kit from Midship Garage®, for the 2000-2005 Toyota Celica GT, GT-S ZZT allows ...
The Tidal widebody kit from Midship Garage®, for the 2000-2005 Toyota Celica GT, GT-S ZZT allows for an increase of + ~30mm front and + ~50mm rear for a wider profile. Handcrafted in the USA. FEATURES (2) ~+30mm Front over fender w/ Front bumper garnish (2) ~+50mm Rear over fender w/ Rear bumper garnish SPECIFICATIONS Brand Midship Garage Product Number MG-ZZT-TDL0001 Material Fiberglass Finish Unpainted, Satin Black Type Exterior, Aftermarket T.U.V. (Europe) No ...
Midship Garage - 00-06 Toyota MR2 Spyder, MR-S - Rear Engine Lid Hydraulic Strut Kit
Replace your 2000-2006 Toyota MR2 Spyder, MR-S, Roadster OEM rear engine lid prop with a hydrauli...
Replace your 2000-2006 Toyota MR2 Spyder, MR-S, Roadster OEM rear engine lid prop with a hydraulic kit by Midship Garage. The 5052 Aluminum brackets and hydraulic struts pairing are rated or up to a combined average of 22.5lbs. FEATURES Midship Garage Brackets Laser cut & machine formed 5052 Aluminum USA Made High corrosion resistance Available in raw or black powder coat. Universal Hydraulic Strut Optional Strength of 22.5lbs (ideal for engine lid only) or 28lbs (suitable for added d...
Midship Garage - 00-05 Toyota MR2 Spyder, MR-S - 11.2" Brembo 4 Piston Front Brake Kit
Midship Garage introduces the first of its kind, big Brembo retrofit brake kit for the budget con...
Midship Garage introduces the first of its kind, big Brembo retrofit brake kit for the budget conscious driver. Utilizing Brembo 4-pot, monobloc caliper and an 11.2" rotor. Prototyped and designed by Quantis Concepts, the chromoly 4340 caliper bracket allows for the use of a Brembo front caliper on your 2000-2006 Toyota MR2 Spyder, MR-S, Roadster ZZW30. Increased number of caliper pots and larger rotor diameter and thickness compared to the stock 10.3" means more surface area and increased st...
Midship Garage - Toyota MR2 SW20, 3S-GTE Gen. 2, 3, 4 - Coil-on Plug & Billet Adapter Conversion Kit
Midship Garage introduces an Coil-on-Plug conversion kit, utilizing aftermarket coil on plugs, mo...
Midship Garage introduces an Coil-on-Plug conversion kit, utilizing aftermarket coil on plugs, mounted to a USA made Billet Aluminum bracket for your 3S-GTE Gen 2, 3, 4 engines. This conversion will give you the ignition power required for your high horsepower build. FEATURES Direct-fit installation For 2nd, 3rd, or 4th Generation MR2 SW20 3S-GTE engine. Select your engine type from the drop-down menu. This kit includes: 12/2021: Genuine Denso 'red top' Coil on Plug included x 4 Univer...
Midship Garage - 00-06 Toyota MR2 Spyder, MR-S - Engine Lid Dual Fan & Shroud Kit
The Midship Garage Engine Lid Dual Fan & Shroud Kit for the 2000-2006 Toyota MR2 Spyder, MR-S...
The Midship Garage Engine Lid Dual Fan & Shroud Kit for the 2000-2006 Toyota MR2 Spyder, MR-S, Roadster (ZZW30) was designed with the goal of seeking to utilize the most efficient size cooling fans for the rear engine compartment. Designed by Quantis Concepts, made in USA. The Midship Garage Aluminum Dual Fan Shroud, a unique V-shape design, laser cut from 6061 Aluminum, and machine formed. Allowing for the setup to clear the OEM rear strut bar and water runoff during the rainy season. Th...
Midship Garage - Toyota MR2 Spyder, MR-S - Oil Cooler & Shroud Kit
This oil cooler & shroud kit from Midship Garage®, designed by Quantis Concepts, uses an effi...
This oil cooler & shroud kit from Midship Garage®, designed by Quantis Concepts, uses an efficient size oil cooler for the rear engine compartment of your 2000-2006 Toyota MR2 Spyder, MR-S ZZW30. This USA Made shroud and bracket design is laser cut from 6061 Aluminum, and machine formed. The shroud serves as both a heat shield and duct, preventing the incoming air from mixing with hot air, by directing air flow from the passenger side intake vent, through use of it's unique duct-like shap...
Midship Garage - Toyota MR2 Spyder, MR-S - Link G4+, G4X Monsoon Plug & Play Wiring Harness for C...
Midship Garage offers customizable plug & play wiring harnesses for your MR2 Spyder, MR-S, Ro...
Midship Garage offers customizable plug & play wiring harnesses for your MR2 Spyder, MR-S, Roadster ZZW30 with a 2003-2006 Toyota Corolla, RunX 2ZZ-GE engine swap. This harness is designed for Link's G4+ Monsoon and equivalent 'G4X' model ECU. (ECU Sold Separately). FEATURES Fully plug and play jumper harness using factory ECU for dash and accessory functions. Additional sub-harnesses and lengths (fuel sensor, IAT, MAP, etc.) +$75 ea. Select number of sub-harnesses from drop-down menu...
Midship Garage® Short Sleeve T-Shirt, Sage
Midship Garage® is an automotive company by enthusiasts for enthusiasts. Show your support in wea...
Midship Garage® is an automotive company by enthusiasts for enthusiasts. Show your support in wearing one of our quality t-shirts made on demand. FEATURES • 100% ring-spun cotton• Sport Grey is 90% ring-spun cotton, 10% polyester• Dark Heather is 65% polyester, 35% cotton• 4.5 oz/yd² (153 g/m²)• Shoulder-to-shoulder taping• Quarter-turned to avoid crease down the center• Blank product sourced from China or Bangladesh The sizes correspond to a smaller size in the US market, so US customers sho...
Midship Garage® Short Sleeve T-Shirt, Black
Midship Garage® is an automotive brand by enthusiasts for enthusiasts. Show your support in weari...
Midship Garage® is an automotive brand by enthusiasts for enthusiasts. Show your support in wearing one of our quality, branded t-shirts made on demand. FEATURES • 100% ring-spun cotton• Sport Grey is 90% ring-spun cotton, 10% polyester• Dark Heather is 65% polyester, 35% cotton• 4.5 oz/yd² (153 g/m²)• Shoulder-to-shoulder taping• Quarter-turned to avoid crease down the center• Blank product sourced from Bangladesh, Honduras, Haiti, Mexico, or Nicaragua FAQ Q: Why is this this t-shirt made-to...
Midship Garage® Short-Sleeve T-Shirt, Navy
Midship Garage® is an automotive company by enthusiasts for enthusiasts. Show your support in wea...
Midship Garage® is an automotive company by enthusiasts for enthusiasts. Show your support in wearing one of our quality, branded t-shirts made on demand. FEATURES • 100% ring-spun cotton • Sport Grey is 90% ring-spun cotton, 10% polyester • Dark Heather is 65% polyester, 35% cotton • 4.5 oz/yd² (153 g/m²) • Shoulder-to-shoulder taping • Quarter-turned to avoid crease down the center • Blank product sourced from Bangladesh, Honduras, Haiti, Mexico, or Nicaragua SIZE GUIDE S M L XL 2XL ...
Midship Garage® is an automotive brand by enthusiasts for enthusiasts. Show your support in weari...
Midship Garage® is an automotive brand by enthusiasts for enthusiasts. Show your support in wearing one of our quality embroidered hats made on demand. FEATURES • 100% pre-shrunk cotton twill • Soft crown • 6 sewn eyelets • 6 stitched rows on the brim • 6-panel unstructured cap with a low profile • Seamed front panel without buckram • Adjustable hook and loop closure FAQ Q: Why is this this hat made-to-order? A: This product is made especially for you as soon as you place an order, which is w...
ARP - 2.6" Length Extended Wheel Studs M12x1.5 (4)
ARP Wheel Studs are the stud of choice for setups which utilize wheel spacers or wider wheels. St...
ARP Wheel Studs are the stud of choice for setups which utilize wheel spacers or wider wheels. Stock length studs can be prone to failure due to increased stress levels introduced with wider, heavier wheels. Replace your studs with these heat-treated 8740 chrome moly, tensile strength of 200,000 psi, cadmium plated for extra durability, nuts not included. FEATURES Increased tensile strength of 200,000 psi One set required per wheel. Select up to four sets from the drop down menu. This produ...
A'PEXi - 00-05 Toyota Celica 2ZZ-GE - Power FC ECU + Commander for 2ZZ-GE, Non Drive By Wire
A'PEXi Power FC ECU + Commander is designed specifically for the 2000-2005 Toyota Celica ZZT231 m...
A'PEXi Power FC ECU + Commander is designed specifically for the 2000-2005 Toyota Celica ZZT231 model with a 2ZZ-GE engine and is a direct fit, making installation quick and easy. This high-performance system features a standalone ECU and the Commander, complete with backlit color display, for high-end engine management and tuning capabilities. It's perfect for 2ZZ-swapped vehicles in racing competitions and requires professional dyno-tuning. The Power FC also comes pre-programmed with severa...
Gates - OE Equivalent Fuel Cap
Gates OE Equivalent Fuel Cap is built with durable, heavy-duty materials that ensure a proper sea...
Gates OE Equivalent Fuel Cap is built with durable, heavy-duty materials that ensure a proper seal on the fuel tank filler neck. This OE equivalent cap helps maintain engine and fuel system performance, keeping your car running at its best. FEATURES Meets or exceeds OEM specifications Caps fit both shallow & deep cam filler necks SPECIFICATIONS Brand Gates Product Number GAT-31832 Category Fuel System Type Gaskets & Seals COMPATIBILITY Universal Fitment (fits most v...
Fidanza - Toyota MR2 AW11 6/1/1985-89, 4A-GE 1.6L - Lightweight Aluminum Flywheel
ANNOUNCEMENT 3/14/2023: This product has an estimated restocking date of 4/14/2023. Please email...
ANNOUNCEMENT 3/14/2023: This product has an estimated restocking date of 4/14/2023. Please email with any questions regarding availability. OVERVIEW Optimize your 4AGE & 4AGZE engine rotational speed with a lightweight Fidanza Aluminum Flywheels made in the USA. These are made using the highest quality, most modern materials available. The flywheel itself is made from 6061 T6 billet aluminum. CNC machined with a replaceable friction surface using 1050 high carbon alloy steel. It is incre...
Quaife - Toyota, Lotus (C56, C60, C64, C66) - A.T.B. Helical LSD Differential
The Quaife ATB Helical LSD differential transforms your Toyota, Lotus C56 (5-speed) or C60, C64, ...
The Quaife ATB Helical LSD differential transforms your Toyota, Lotus C56 (5-speed) or C60, C64, C66 (6-speed) transmission's performance. Unlike a conventional plate-style limited slip differential, this helical LSD differential relies on gears rather than clutch plates for its operation. That means it is much smoother in operation. The Quaife ATB Limited Slip Differential LSD is designed to prevent the complete loss of drive that occurs with a conventional differential when one wheel slips...
MFactory - C56, C60, C63, C64, C66 - Helical Differential LSD
MFactory differentials provide a smooth and constant distribution of power to the wheels, maximiz...
MFactory differentials provide a smooth and constant distribution of power to the wheels, maximizing your vehicle's traction. A must for any race car, be it Street, Strip or Track! FEATURES Better and more predictable turn-in Noiseless, smooth operation No adjustments needed smooth engagement No special oil needed MFactory Lifetime Guarantee LSD install kit required (sold separately) SPECIFICATIONS Brand MFactory Product Number MF-TRS-05MRS Category Transmission & Drivetrain ...
Midship Garage - Toyota C56, C59, C60, C63, C64, C66 - OEM LSD Differential Bearing/Axle Seal Ins...
A Midship Garage compiled kit of Genuine Toyota product, necessary for your rebuild or install of...
A Midship Garage compiled kit of Genuine Toyota product, necessary for your rebuild or install of either the Quaife or Kaaz differential in your C56, C59, C60, C64, C66, & S54 transmission. FEATURES Genuine Toyota Product Brand New This kit includes: Differential Taper Bearing (Front) x 1 Differential Taper Bearing (Rear) x 1 Axle Output Shaft Seal (Left) x 1 Axle Output Shaft Seal (Right) x 1 SPECIFICATIONS Product Number MG-90366-CXX-K Brand Toyota Category Transmission &...
K&N - '94-'99 Toyota Celica GT, ST - High-Flow Performance Replacement Air Filter
K&N Replacement High-Flow Air Filters for Toyota Celica 1994-1999 (GT & ST) and Camry 19...
K&N Replacement High-Flow Air Filters for Toyota Celica 1994-1999 (GT & ST) and Camry 1992-1996 XLE 4cyl & V6 models are designed for increased horsepower and improved acceleration. It's engineered to be washable and reusable, so you can save with no need to replace it for up to 50,000 miles; plus, it's emissions legal in all 50 US states. K&N comes with a Million Mile Limited Warranty, so you can drive confidently knowing you're covered. FEATURES High Air Flow with Excellen...
Planted Technology - Toyota MR2 Spyder, MR-S - Driver, Passenger Seat Brackets
The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of th...
The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. FEATURES Laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Black powdercoat finish. Each bracket is pre-slotted with hole patterns to accept s...
Cometic - Toyota Gen-1 3S-GE, 3S-GTE - MLS Head Gasket, 0.040" Thickness, 87mm Bore
Cometic Multi-Layer Steel gaskets are comprised of multiple embossed layers of both viton coated ...
Cometic Multi-Layer Steel gaskets are comprised of multiple embossed layers of both viton coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. FEATURES Multi-layered Steel Viton embossed and coated outer layers both sides with a flouroelastomer rubber based material (Viton) Heat resistant to 2500C or 4820F USA Made SPECIFICATIONS Brand Cometic Product Number CGS-C4314-040 Material Multi-...
Works Bell - Toyota MR2 Spyder, MR-S - 'Rapfix II' 50mm Short Boss Steering Hub Kit
Works Bell Japan has developed an exclusive short hub system for the 2000-2007 Toyota MR2 Spyder,...
Works Bell Japan has developed an exclusive short hub system for the 2000-2007 Toyota MR2 Spyder, MR-S, Roadster 'ZZW30'. This hub is designed for the specific use with the Works Bell Rapfix II, Works Bell Rapfix GTC and Works Bell Rapfix GTC Hybrid quick releases. This short hub system is designed to compensate for the additional length of the Works Bell Steering Quick Release and prevents setting the steering wheel too close to the driver. FEATURES Genuine Works Bell Japan Precision made f...
PPE Engineering - Toyota MR2 Spyder, MR-S - 2ZZ-GE 4-1 Swap Header (Standard or Merge Collector)
PPE Headers have a significant increase in flow compared for the 2ZZ-GE swapped MR2 Spyder. Compl...
PPE Headers have a significant increase in flow compared for the 2ZZ-GE swapped MR2 Spyder. Completely TIG welded construction with thick 16 gauge tubing for long lasting power gains and optional parallel merge collector. FEATURES 1 5/8″ stepped to 1 3/4″ runners and a 2.5″ outlet. Construction is stainless steel for a long service life. Standard collector provides good airflow and modest gains at an affordable price. Optional Parallel Merge collector option, made-to-order in 6-8 weeks. In...
Exedy - Toyota Celica GT, GT-S - 1ZZ, 2ZZ OE Clutch Pro-Kit
Maintain a near-stock pedal feel for your 1ZZ-FE, 2ZZ-GE powered 2000-2006 Toyota Celica GT, GT-S...
Maintain a near-stock pedal feel for your 1ZZ-FE, 2ZZ-GE powered 2000-2006 Toyota Celica GT, GT-S ZZT with the EXEDY OE Clutch Pro-Kit, manufactured on the same production line as OEM clutch components! Not many companies can promise you the guaranteed operation and durability that the car manufacturers demand of our product. FEATURES This kit includes: Clutch Disc x 1 Pressure Plate x 1 Release Bearing x 1 Alignment tool x 1 SPECIFICATIONS Product Number EXE-KTY03 Brand Exedy...
Cusco - Toyota MR2 Spyder, MR-S - OS Front Strut Tower Bar
The Cusco OS Strut Tower Bars eliminate chassis flex at the most vital area of your 2000-2006 Toy...
The Cusco OS Strut Tower Bars eliminate chassis flex at the most vital area of your 2000-2006 Toyota MR2 Spyder, MR-S, Roadster (ZZW30) - between the strut towers, essentially to prevent the misalignment of suspension mounting points experienced during high cornering loads. The interior of the hollow shafts are carefully designed so that the bars are kept lightweight while providing the most rigid strength. The end result is the suspension performing at its intended optimal condition with the...
Mishimoto - Toyota MR2 Spyder, MR-S - Aluminum Performance Radiator
Mishimoto Performance Radiator for Toyota MR2 Spyder features a three-row, 2.05-in thick, efficie...
Mishimoto Performance Radiator for Toyota MR2 Spyder features a three-row, 2.05-in thick, efficient brazed aluminum core with increased fluid capacity and optimal heat dissipation. Provides efficient temperature reduction for use on the street, track, or autocross course. FEATURES Full aluminum construction including durable, TIG-welded end tanks Features a three-row, 2.05-in thick, efficient brazed aluminum core Increased fluid capacity and optimal heat dissipation Provides efficient tempe...
EBC Brakes - Toyota MR2 SW20 90-99 - 'Yellowstuff' Front Brake Pad Set, Front & Rear
The ultimate street-track brake pad for your 1990-1999 Toyota MR2 (SW20). The EBC Yellow Stuff co...
The ultimate street-track brake pad for your 1990-1999 Toyota MR2 (SW20). The EBC Yellow Stuff compound is essentially a race pad that also works from cold and can be safely used on the highway. If you want the ultimate in high friction braking this is the pad to choose. Brakes feel superb from first touch of the pedal and stay effective up to race temperatures. All EBC pads feature the EBC Brake-in surface coating which helps pads seat quickly after install. FEATURES High friction pad for b...
Toyota OEM - 00-01 Celica GT-S - Exhaust Manifold (Ceramic Coated), USED
This genuine Toyota OEM exhaust manifold is designed specifically for the 2000-2001 Celica GT-S w...
This genuine Toyota OEM exhaust manifold is designed specifically for the 2000-2001 Celica GT-S with the 2ZZ-GE 1.8L engine, without air injection. Reinforced with an aftermarket Cerakote titanium ceramic coating and accompanying ceramic heat shields. FEATURES Genuine Toyota product Used, working condition Cerakote Titanium Ceramic Coating (+$100 value) Cerakote Chrome Ceramic Headers (+$100 value) SPECIFICATIONS Brand Toyota Product Number MG-TYT2ZZ-EX01 Category Exhaust System ...
Toyota OEM - 2ZZ-GE 1.8L - VVT/VVL Oil Control Valve Solenoid, Like New (2)
A pair of like-new, Genuine Toyota VVT Oil Control Solenoids, for Toyota, Lotus 2ZZ-GE. FEATURES ...
A pair of like-new, Genuine Toyota VVT Oil Control Solenoids, for Toyota, Lotus 2ZZ-GE. FEATURES Genuine Toyota product Used, working condition as shown. (>5,000 miles in operation) Select from one (single) or two (pair) quantity from drop down menu. 30% savings from retail SPECIFICATIONS Brand Toyota Product Number TYT-15330-22060 Category Ignition & Timing Type Solenoid COMPATIBILITY Year Vehicle Model Chassis Sub-model & Trim Engine 2000, 2001, 2002, 2003, 200...
Link G4+ Storm ECU, PLX Wideband Module w/ Sensor + PnP Wiring Harness for 2ZZ Swap MR2 Spyder, M...
Used LINK G4+ Storm ECU, including Midship Garage plug & play jumper wiring harness for 2000-...
Used LINK G4+ Storm ECU, including Midship Garage plug & play jumper wiring harness for 2000-2006 MR2 Spyder. MR-S, & PLX Wideband Module + O2 sensor. Link G4+ ECU The Link G4+ offers full engine control. Fury and Thunder harnesses come complete with Bosch 4.9 LSU wideband sub-harnesses. In some instances, the factory ECU remains in parallel to communicate on the OEM CANBUS or control automatic transmissions. PLX Wideband SM-AFR Sensor Module for measuring Wideband Air/Fuel Ratio. ...
PPE Engineering - MR2 Spyder, MR-S - 2ZZ-GE Swap Header (Ceramic Coated) + OEM Gaskets, USED
PPE Engineering 2ZZ swap header for Toyota MR2 Spyder, MR-S with 2ZZ-GE engine in used, working c...
PPE Engineering 2ZZ swap header for Toyota MR2 Spyder, MR-S with 2ZZ-GE engine in used, working condition. This header has been professionally ceramic coated with Cerakote, complete with midpipe mounting bolts and spare gaskets. FEATURES Used, working condition as shown Retail price for header (no ceramic coating), $895 Cerakote H-170 Titanium Ceramic Coating (+$100 value) Keeps engine bay temperature down and easy to handle & maneuver in minutes after shutting off engine. Includes ha...
Toyota OEM - 2ZZ-GE 1.8L - 11.5:1, 82mm Piston Set, USED
FEATURES Used, working condition as shown. Hot tank cleaned Piston Rings not included Set of 4 ...
FEATURES Used, working condition as shown. Hot tank cleaned Piston Rings not included Set of 4 SPECIFICATIONS Brand Toyota Product Number TYT-13101-88601-U Category Engine Type Pistons COMPATIBILITY Year Vehicle Model Chassis Sub-model & Trim Engine 2000, 2001, 2002, 2003, 2004, 2005, 2006 Toyota Celica ZZT230---ZZT231 3dr LiftbackGT (USA)SS-I (Japan)190 (Europe)---GT-S (USA, Canada)SS-II (Japan)T-Sport (Europe) 1.8L 1ZZ-FE---1.8L 2ZZ-GE 2003, 2004, 2005, 2006...
MWR - 00-06 Toyota MR2 Spyder, MR-S 2ZZ Swap - Cold Air Intake + Denso MAF Sensor, USED
Used, working condition MWR intake for Celica 2ZZ-GE swapped 00-06 MR2 Spyder, MR-S, Roadster ZZW...
Used, working condition MWR intake for Celica 2ZZ-GE swapped 00-06 MR2 Spyder, MR-S, Roadster ZZW30. Includes Denso OE equivalent replacement MAF sensor. FEATURES Used, working condition as shown. Denso MAF Sensor >5,000 miles in operation (~$99 retail) MWR Intake V.1 ($305 retail) Modified with bung for aftermarket intake temp sensor K&N Filter is cleanable and 100% re-useable SPECIFICATIONS Product Number Intake Kit: MWR-511128MAF Sensor: DEN-197-6020 Category Intake Syste...
Radium Engineering - Toyota, Lotus 2ZZ-GE 1.8L - Fuel Rail + Pressure Gauge w/ PTFE Hose, USED
This high volume fuel rail works on all 2ZZ-GE engines. Both ends of the rail are tapped to 8AN O...
This high volume fuel rail works on all 2ZZ-GE engines. Both ends of the rail are tapped to 8AN ORB female threads. These ports use positive o-ring seals. The center port accommodates the 2ZZ-GE fuel pulse damper from the OEM fuel rail. This helps alleviate all high frequency pressure fluctuations. FEATURES Used, working condition as shown. Retail price ~$408, 30% savings Includes OEM fuel pulse damper Billet aluminum construction Anodized surface finish for corrosion resistance Stealth la...
Toyota OEM - C59, C60, C63, C64, C66 Helical Rear Differential LSD, USED
Used Genuine Toyota Helical Limited-Slip Differential 'LSD' for the C-Series (C56, 59, 60, 64, 66...
Used Genuine Toyota Helical Limited-Slip Differential 'LSD' for the C-Series (C56, 59, 60, 64, 66) and S54 transmissions will allow you to put power to the ground much more efficiently, especially when exiting corners. Reduces wheel hop and understeer as well as unpredictable handling in the corners. An LSD is an excellent addition to any car even near stock power levels but is absolutely critical after the addition of forced induction. This is a helical LSD so it only acts when power is appl...
Deatschwerks - Toyota 1ZZ-FE, 2ZZ-GE - 440cc Top Feed Injector Set (4), USED
Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each s...
Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Testing is performed in-house on their custom built New Age Technologies injector flow bench. FEATURES Used, working condition as shown. Ultrasonic cleaned and flow tested $359 retail price, 20% savings! Below is a brief outline of Deatschwerks' spec testing: 6-point coil test Leak t...
Cosworth - Toyota, Lotus 2ZZ-GE 1.8L - 14.0:1 CR, 82mm Forged Piston Set, USED
The Cosworth Toyota/Lotus 2ZZ-GE engine parts have gone through countless hours of engineering an...
The Cosworth Toyota/Lotus 2ZZ-GE engine parts have gone through countless hours of engineering and evaluation to determine the best combination of parts and build specifications, ensuring maximum reliable performance. Their race engine program expands to over 50 years, these pistons are designed and engineered to withstand long periods of high performance driving conditions. All Cosworth pistons are engineered and manufactured using the same methods as their Formula One pistons, and one of t...
Midship Garage - Toyota MR2 SW20 - JDM Kouki Tail Light & Center Garnish Kit, USED
Used Genuine Toyota rear tail lights for the 1991-1999 Toyota MR2 SW20, refurbished to order. Thi...
Used Genuine Toyota rear tail lights for the 1991-1999 Toyota MR2 SW20, refurbished to order. This is the JDM version for 1994+ Japanese market models, which has amber corner lights, compared to the USDM with red corner lights. FEATURES Genuine Toyota Product Refurbished Gloss repainting of center garnish in your choice of factory Toyota color. Please leave a note during checkout. 2K clear coat and polished lenses. The kit includes: Toyota OEM Left Tail Light x 1 Toyota OEM Right Ta...
Toyota OEM - 00-06 MR-S ZZW30 (RHD) - JDM Floor Mat Set, USED
This Genuine JDM Toyota MR-S (RHD) Floor Mat Set is for the retro enthusiast or collector, lookin...
This Genuine JDM Toyota MR-S (RHD) Floor Mat Set is for the retro enthusiast or collector, looking for a rare trinket for to liven up their factory interior. Featuring the famous 90's style Tiger stripe pattern, commonly used amongst 90s - early 2000s Japanese vehicles. This set has been vacuumed, conditioned and steam cleaned, ready for install! FEATURES Genuine Toyota product Fits RHD model only Made in Japan Vacuumed, conditioned & steam cleaned SPECIFICATIONS Brand Toyota Produ...
Weapon R - Toyota Celica GT, GT-S 00-01 - CARB Legal Dragon Intake, USED
Weapon-R CARB Legal Dragon Intake Systems are matched with the Dragon Filter, which provides maxi...
Weapon-R CARB Legal Dragon Intake Systems are matched with the Dragon Filter, which provides maximum airflow with the protection of high quality dense Poly Urethane Foam. FEATURES Open pore high density re-usable foam filter High-polished Aluminum piping Everything included for a clean installation Foam Cleaning Solution Spray Included USED, working condition as shown. SPECIFICATIONS Part Number 805-121-101 Brand Weapon-R Category Intake Systems Type Air Intake CARB Legal EO 20...
Toyota OEM - 00-05 MR2 Spyder, MR-S - C66 Euro 6-Speed Transmission w/ LSD, USED
Midship Garage offers Genuine OEM C66 Euro (EUDM) and Japanese (JDM) market 6-speed transmission ...
Midship Garage offers Genuine OEM C66 Euro (EUDM) and Japanese (JDM) market 6-speed transmission for your 2000-2006 Toyota MR2 Spyder, MR-S, Roadster ZZW30. The C66 transmission features a helical LSD (Limited Slip Differential) standard from factory. It requires no modification to install, unlike the C60 Celica/Corolla/Matrix/Vibe transmissions which require shifter and linkage. Enjoy lower cruising revs with the extra gear, increasing fuel economy. FEATURES Used, working condition Normal w...
Toyota OEM - 00-06 Celica, Corolla T-Sport/RunX - C64 6-Speed Transmission w/ LSD, USED
The Toyota C64 6-speed transmission, with 4.5 Final Drive was available in the European markets ...
The Toyota C64 6-speed transmission, with 4.5 Final Drive was available in the European markets for the Toyota Celica and Corolla T-Sport with 2ZZ-GE engine. This C64 transmission features an optional fitted helical LSD (Limited Slip Differential). FEATURES Used, working condition Given the age of the part, we provide a general estimate of 100-125k miles, with normal wear. Mounting Brackets not included. 12/8/2022: Each transmission is opened and inspected by the vendor for quality assura...
Toyota OEM - 90-99 MR2 SW20 Turbo - E153 5-Speed Transmission w/ LSD, USED
This 5-speed transmission was available in the European and Japanese markets for the 1993+ Toyot...
This 5-speed transmission was available in the European and Japanese markets for the 1993+ Toyota MR2 SW20 model with the 3S-GTE engine. This E153 transmission features a viscous LSD (Limited Slip Differential) standard from factory. The E153 is also offered in the Europe-Asia (non-LSD) and US (non-LSD) version. FEATURES Used, working condition Mounting Brackets not included. 12/8/2022: Each transmission is inspected by the vendor for quality assurance before shipment. The external casing i...
